Set the most common well inputs
setWellInput(field.name = "HAGBR.GUO", well.name = "ExampleGuo", depth.wh = 0, depth.bh = 9700, diam.in = 1.995, GLR = 75, liq.rt = 758, wcut = 0.1, thp = 200, tht = 80, bht = 180, API = 40, gas.sg = 0.7, wat.sg = 1.05, oil.visc = 5, ed = 6e-04, if.tens = 30, salinity = 0, U = 8, oil.cp = 0.53, gas.cp = 0.5, wat.cp = 1, angle = pi/2)
| field.name | field name. Usually comprises several wells |
|---|---|
| well.name | well name |
| depth.wh | depth at wellhead |
| depth.bh | depth at bottomhole of well feet |
| diam.in | well diameter inches |
| GLR | gas liquid ratio |
| liq.rt | liquid rate |
| wcut | watercut |
| thp | tubing head pressure |
| tht | tubing head temperature |
| bht | bottomhole temperature |
| API | gravity of oil |
| gas.sg | specific gravity of gas |
| wat.sg | specific gravity of water |
| oil.visc | oil viscosity |
| ed | relative rougness |
| if.tens | interfacial tension between ... |
| salinity | water salinity |
| U | overall heat transfer coefficient |
| oil.cp | heat capacity of oil |
| gas.cp | heat capacity of gas |
| wat.cp | heat capacity of water |
| angle | angle of the well to the horizontal |